Thermo Scientific ISQ LT Single Quadrupole Mass Spectrometer with Thermo Chromatorgraph Trace 1310 (Multi Injector/ FID/TCD)

Description

Thermo Scientific ISQ LT Single Quadrupole Mass Spectrometer with Thermo Chromatorgraph Trace 1310 (Multi Injector/ FID/TCD)

Includes TriPlus RSH Autosampler (Liquid Headspace, Liquid Direct, Heat Mixer include, Purge system)

Chemstation licence

Mass Range     1.2 to 1100 U with Unit Mass Resolution

Detectors               DynaMax XR

EI Full Scan Installation Specification

1 µL of 1 pg/µL Octafluoronaphthalene (OFN) Will Produce The Following Minimum Signal to Noise for m/z 272 When Scanning From 50 to 300 U:600:1 Using Helium as Carrier Gas

Electron Energy       Adjustable From 0 to 150 eV

Emission Current      Up to 350 µA

Mass Filte      Dual-Stage Mass Filter with Off-Axis Ion Guide and Solid, Homogeneous Non-Coated Quadrupole Rods

Modes

Standard: Electron Ionization (EI), with Full Scan, SIM, and Sequential Full Scan/SIM; Optional: Chemical Ionization, Including PCI, NCI, PPINICI and EI/CI Combination

Negative Chemical Ionization Installation Spec

2 µL of 100 fg/µL of OFN Will Produce The Following Minimum Signal to Noise for m/z 272 When Scanning From 50 to 300 U Using Methane Reagent Gas: 600:1 Using Helium as Carrier Gas

Pumping Systems

Standard Capacity (>60 L/s) or High-Capacity (>230 L/s), or Extended Capacity (300 L/s) Turbomolecular Pump with 3.3 m3/h Mechanical Pump; Optional Oil-Free Scroll Pump

Reagent Gas

Software-Switchable Dual Reagent Gas with Digital Flow Control

Scanning Capabilities

Scan Rate: Up to 20,000 U/Sec; Scan Cycles: 97 Scans/Sec to Disc When Scanning Across 125 U

Source Type

ExtractaBrite EI Source, with Repeller, Source Lenses, RF Lens and Dual Filaments in All Ionization Modes

acuum Probe Interlock

Vacuum Probe Interlock to Remove Entire Source or Change Ionization Modes Without Venting

FTIR for Breathing Air and Rare Gas

ISQ Single Quadrupole Mass Spectrometer